DivIDE: Difference between revisions

Jump to navigation Jump to search
196 bytes added ,  20 November 2013
Availability of DivMMC EnJoy!
mNo edit summary
(Availability of DivMMC EnJoy!)
Line 10: Line 10:
* The '''DivIDE Plus''', developed by Jarek Adamski and Jurek Dudek, increases both the ROM and RAM to 512K, and adds an onboard CompactFlash connector and a pass-through edge connector. However, it is reported to have a number of hardware bugs - in particular, it places junk values on the I/O bus, causing incompatibility with software that uses IM2 mode without a full interrupt table.
* The '''DivIDE Plus''', developed by Jarek Adamski and Jurek Dudek, increases both the ROM and RAM to 512K, and adds an onboard CompactFlash connector and a pass-through edge connector. However, it is reported to have a number of hardware bugs - in particular, it places junk values on the I/O bus, causing incompatibility with software that uses IM2 mode without a full interrupt table.
* The '''DivIDE 2k11''', produced by Lotharek, provides the same 8K ROM / 32K RAM configuration as the original model, but is re-implemented in CPLD and vertically mounted for a much smaller footprint. It has a CompactFlash slot on board, and no IDE connector.
* The '''DivIDE 2k11''', produced by Lotharek, provides the same 8K ROM / 32K RAM configuration as the original model, but is re-implemented in CPLD and vertically mounted for a much smaller footprint. It has a CompactFlash slot on board, and no IDE connector.
* The '''DivMMC''', announced by Mario Prato of Apulia Group Retrocomputing in May 2013, provides two SD card slots. At the hardware level, it differs from earlier DivIDE models in that it uses the SD card's native protocol for data access, rather than IDE - nevertheless, it is strongly inspired by the DivIDE hardware design, and runs a version of ESXDOS providing the same functionality (except where the application software relies on direct IDE access, such as audio/video players). Production and availability are yet to be announced, but schematics are available on the [http://aticatac.altervista.org/portale/?q=node/12 DivMMC website].
* The '''DivMMC''', announced by Mario Prato of Apulia Group Retrocomputing in May 2013, provides two SD card slots. At the hardware level, it differs from earlier DivIDE models in that it uses the SD card's native protocol for data access, rather than IDE - nevertheless, it is strongly inspired by the DivIDE hardware design, and runs a version of ESXDOS providing the same functionality (except where the application software relies on direct IDE access, such as audio/video players). Schematics are available on the [http://aticatac.altervista.org/portale/?q=node/12 DivMMC website].
* The '''DivMMC EnJoy!''' is an enhancement of the DivMMC by Ben Versteeg, adding a Kempston joystick interface.


== Firmware ==
== Firmware ==
Line 26: Line 27:
* The [http://www.divide.cz/index.php?x=eshopn divide.cz shop] (based in the Czech Republic) has reliably sold the original DivIDE for the last few years, along with accessories, spare parts and other goodies.
* The [http://www.divide.cz/index.php?x=eshopn divide.cz shop] (based in the Czech Republic) has reliably sold the original DivIDE for the last few years, along with accessories, spare parts and other goodies.
* The DivIDE 2k11 is sold by [http://lotharek.pl/ Lotharek] (Poland).
* The DivIDE 2k11 is sold by [http://lotharek.pl/ Lotharek] (Poland).
* Ben Versteeg is [http://www.worldofspectrum.org/forums/showthread.php?p=735844 gearing up to sell the DivMMC EnJoy!] as of November 2013.
* Sintech ([http://sintech-shop.co.uk/ UK], [http://www.sintech-shop.de/ Germany], [http://www.sintech-shop.cz/ Czech Republic]) regularly have the original DivIDE in stock.
* Sintech ([http://sintech-shop.co.uk/ UK], [http://www.sintech-shop.de/ Germany], [http://www.sintech-shop.cz/ Czech Republic]) regularly have the original DivIDE in stock.
* [http://www.rwapsoftware.co.uk/ RWAP Software] (UK) have on various occasions offered both the DivIDE Plus and original DivIDE through their trading site [http://www.sellmyretro.com/ SellMyRetro]. As of July 2013 [http://www.sellmyretro.com/offer/details/Sinclair-ZX-Spectrum-DivIDE-Plus-Interface-2715 a new batch of DivIDE Plus interfaces] is on sale.
* [http://www.rwapsoftware.co.uk/ RWAP Software] (UK) have on various occasions offered both the DivIDE Plus and original DivIDE through their trading site [http://www.sellmyretro.com/ SellMyRetro]. As of July 2013 [http://www.sellmyretro.com/offer/details/Sinclair-ZX-Spectrum-DivIDE-Plus-Interface-2715 a new batch of DivIDE Plus interfaces] is on sale.
77

edits

Navigation menu