ZX Spectrum +2A/2B, +3/3B

From SinclairFAQ
Revision as of 20:21, 24 October 2010 by Guesser (talk | contribs)
Jump to: navigation, search

The ZX Spectrum +3 was released on the 16th of May 1987. It is a significant redesign from the original "Toastrack" 128K and Grey +2 models, with additional memory paging capabilities to support CP/M and additional ROM containing the disc operating system code. The "Black +2" appeared soon after. This computer can be one of two machines, a +2A or the later +2B. The lower case moulding carries one of these two designations, however this has been found not to be an accurate indication of which model the computer is as the majority of machines carrying the +2A label actually contain a +2B motherboard. Development of the +2B continued until 1990. This was the last official model of ZX Spectrum produced.


Common hardware specifications
  • Processor: Zilog Z80A microprocessor clocked at 3.5469MHz.
  • ROM: 64KB ROM. 2*32KB EPROM arranged in 4 pages of 16KB.
  • RAM: 128KB of Dynamic RAM, arranged in 8 pages of 16KB.
  • Graphics: 256 x 129 pixels, 16 colours, attribute based. See Spectrum Video Modes.
  • Sound: AY-3-8912 3 channel, 8 octave Programmable Sound Generator and "beeper". Modulated onto video signal.
  • Keyboard: 58 plastic keys with metal springs, operating a plastic membrane.
  • I/O: Software controlled RS232 serial port. AUX Port. Tape In (ear) and Tape Out (mic). Two Sinclair SJS Joystick Ports. Parallel Printer Port
+3 specific hardware
  • Floppy Disc Controller: Zilog Z0765A (uPD765A).
  • I/O: "Disk B:" External disk drive connector.
Black +2 specific hardware
  • Cassette interface daughterboard.
  • "Datacorder" cassette mechanism.