651
edits
(Created page with "Category:Edge Connectors Category:Hardware <!-- end of category list --> {{Template:ZX80/81_edge_connector|D7′|[[#Chip_Select|{{overline|RAMCS}}&prime...") |
m (→Chip Select) |
||
(6 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
{{Template:ZX80/81 edge connector|[[#Data Bus|D7′]]|[[#Chip Select|{{overline|RAMCS′}}]]|[[#Key Slot|SLOT]]|[[#Data Bus|D0′]]|[[#Data Bus|D1′]]|[[#Data Bus|D2′]]|[[#Data Bus|D6′]]|[[#Data Bus|D5′]]|[[#Data Bus|D3′]]|[[#Data Bus|D4′]]|{{overline|INT}}|{{overline|NMI}}|{{overline|HALT}}|{{overline|MREQ}}|{{overline|IORQ}}|{{overline|RD}}|{{overline|WR}}|{{overline|BUSAK}}|{{overline|WAIT}}|{{overline|BUSRQ}}|{{overline|RESET}}|{{overline|M1}}|{{overline|RFSH}}|[[#Power|+5{{small|V}}]]|[[#Power|+9{{small|V}}]]|[[#Key Slot|SLOT]]|0{{small|V}}|0{{small|V}}|[[#CPU Clock|{{overline|Φ}}]]|A0|A1|A2|A3|A15|A14|A13|A12|A11|A10|A9|A8|A7|A6|A5|A4|[[#Chip Select|{{overline|ROMCS′}}]]}} | |||
{{Template:ZX80/ | |||
<!-- edge connector table ends --> | <!-- edge connector table ends --> | ||
Line 14: | Line 11: | ||
====Chip Select==== | ====Chip Select==== | ||
{{overline| | {{overline|RAMCS′}} and {{overline|ROMCS′}} are connected directly to the ROM and RAM chip select inputs. They are connected to the computer's logic via series resistors so that their value can be overridden by an external peripheral which is denoted by the prime symbol. | ||
The {{overline|ROMCS′}} signal is only present on the ZX81. On the ZX80 this pin is '''NOT''' connected. | |||
====CPU Clock==== | ====CPU Clock==== | ||
The {{overline| | The {{overline|Φ}} signal is available on Lower Pin 6. This clock signal is inverted to provide the clock for the Z80. | ||
====Key Slot==== | ====Key Slot==== | ||
Line 25: | Line 24: | ||
* Lower Pin 1 is connected to the smoothed +5 volt DC output of the internal 7805 regulator. | * Lower Pin 1 is connected to the smoothed +5 volt DC output of the internal 7805 regulator. | ||
* Lower Pin 2 is connected to the +9 volt (nominal) unregulated DC power supply. | * Lower Pin 2 is connected to the +9 volt (nominal) unregulated DC power supply. | ||
[[Category:Edge connectors]] | |||
[[Category:Hardware]] |