ZX-State format
ZX-State (SZX) format
ZX-State is the preferred snapshot format for Spectaculator and Fuse. It is usually used with the extension .SZX. Fuse unofficially uses the mimetype x-spectrum-szx for the format (although this could potentially change to x-spectrum-zxstate or x-spectrum-zx-state).
See the official ZX-State documentation and also the draft of the next version.
Support for the format is implemented in libspectrum (used by Fuse), Zero, ZXDS, SpecEmu and Spin.
Early versions of libspectrum (prior to 1.0.0) contained a bug which caused the A and A' registers to be swapped with F and F', respectively, when loading or saving in the SZX format. Current versions of libspectrum detect "libspectrum: 0.5.0" and earlier versions strings and correct for this.
Format extensions
With the official specification being somewhat stalled, some emulators have added unofficial extensions to the format. These include:
ZXSTDIVIDE
The state of the DivIDE IDE hard disk and CompactFlash card interface.
// DivIDE flags #define ZXSTDIVIDE_EPROM_WRITEPROTECT 1 #define ZXSTDIVIDE_PAGED 2 #define ZXSTDIVIDE_COMPRESSED 4 // DivIDE IDE settings typedef struct _tagZXSTDIVIDEBLOCK { ZXSTBLOCK blk; WORD wFlags; BYTE chMemCtrl; BYTE chNumRamPages; BYTE chData[1]; } ZXSTDIVIDEBLOCK, *LPZXSTDIVIDEBLOCK;
Members
blk
The block header. The block id is ZXSTBID_DIVIDE ('D', 'I', 'D', 'E').
wFlags
Various flags. This can be any combination of:
Flag | Meaning |
ZXSTDIVIDE_EPROM_WRITEPROTECT | The DivIDE's EPROM is write protected. |
ZXSTDIVIDE_PAGED | The DivIDE is currently paged in. |
ZXSTDIVIDE_COMPRESSED | If set, the EPROM data (beginning from chData) will be compressed using the Zlib compression library. |
chMemCtrl
The current value of the DivIDE's memory control register.
chNumRamPages
The amount of RAM installed in this DivIDE interface, in units of 8KB. Normally 4, representing a 32KB DivIDE interface.
chData
The compressed or uncompressed contents of the DivIDE's EPROM. When uncompressed, this member is exactly 16KB (16,384) bytes in size. When loading Zlib compressed pages, the compressed size can be obtained by:
compressedSize = blk.dwSize - ( sizeof( ZXSTDIVIDEBLOCK ) - sizeof( ZXSTBLOCK ) - 1 );
ZXSTDIVIDERAMPAGE
This block is used to save and restore the contents of the DivIDE's built-in RAM.
A zx-state file will contain a number of these blocks, normally 4 for the 32KB DivIDE. A ZXSTDIVIDE block will proceed the first of these blocks.
// Ram pages are compressed using Zlib #define ZXSTDRF_COMPRESSED 1 // DivIDE RAM page typedef struct _tagZXSTDIVIDERAMPAGEBLOCK { ZXSTBLOCK blk; WORD wFlags; BYTE chPageNo; BYTE chData[1]; } ZXSTDIVIDERAMPAGEBLOCK, *LPZXSTDIVIDERAMPAGEBLOCK;
Members
blk
The block header. The block id is ZXSTBID_DIVIDERAMPAGE ('D', 'I', 'R', 'P').
wFlags
Various flags. This can be any combination of:
Flag | Meaning |
ZXSTDRF_COMPRESSED | If set, the RAM page data (beginning from chData) will be compressed using the Zlib compression library. |
chPageNo
Page number of this 8KB RAM page. For the 32KB version of the DivIDE interface, this is 0 - 3.
chData
The compressed or uncompressed contents of the RAM page. When uncompressed, this member is exactly 8KB (8,192) bytes in size. When loading Zlib compressed pages, the compressed size can be obtained by:
compressedSize = blk.dwSize - ( sizeof( ZXSTDIVIDERAMPAGEBLOCK ) - sizeof( ZXSTBLOCK ) - 1 );
ZXSTLEC
This is documented in the draft of the next version of the SZX format.
ZXSTLECRAMPAGE
This is documented in the draft of the next version of the SZX format.
ZXSTPALETTE
The state of the ULA registers found in the 64 colour replacement ULA. This block may be present for any machine.
// Palette Block flags #define ZXSTPALETTE_DISABLED 0 #define ZXSTPALETTE_ENABLED 1 // Palette Block. Contains the palette register values typedef struct _tagZXSTPALETTEBLOCK { ZXSTBLOCK blk; BYTE chFlags; BYTE chCurrentRegister; BYTE chPaletteRegs[64]; } ZXSTPALETTEBLOCK, *LPZXSTPALETTEBLOCK;
Members
blk
The block header. The block id is ZXSTBID_PALETTE ('P', 'L', 'T', 'T').
chFlags
A flags that indicates if the palette is enabled or if the normal display mode is in use. This can be one of:
Flag | Meaning |
ZXSTPALETTE_DISABLED | Normal palette mode with BRIGHT and FLASH |
ZXSTPALETTE_ENABLED | 64 colour palette mode |
chCurrentRegister
The currently selected palette register (0-63).
chPaletteRegs
The current values of the palette registers.
ZXSTSPECTRANET
NB: Note that the draft of the next version of the SZX format is out of date and does not represent what has been implemented in Fuse.
This block represents Dylan Smith's Spectranet Ethernet interface for the 16K, 48K, 128, +2, +2A and +3 ZX Spectrums.
// Spectranet state #define ZXSTSNETF_PAGED 0x0001 #define ZXSTSNETF_PAGED_VIA_IO 0x0002 #define ZXSTSNETF_PROGRAMMABLE_TRAP_ACTIVE 0x0004 #define ZXSTSNETF_PROGRAMMABLE_TRAP_MSB 0x0008 #define ZXSTSNETF_ALL_DISABLED 0x0010 #define ZXSTSNETF_RST8_DISABLED 0x0020 #define ZXSTSNETF_DENY_DOWNSTREAM_A15 0x0040 #define ZXSTSNETF_NMI_FLIPFLOP 0x0080 typedef struct _tagZXSTSPECTRANET { ZXSTBLOCK blk; DWORD dwFlags; BYTE chPageA; BYTE chPageB; WORD wTrap; BYTE chRegisters[0x30]; } ZXSTSPECTRANET, *LPZXSTSPECTRANET;
Members
blk
The block header. The block id is ZXSTBID_SPECTRANET ('S', 'N', 'E', 'T').
wFlags
Various flags. This can be any combination of:
Flag | Meaning |
ZXSTSNETF_PAGED | The Spectranet is currently paged. |
ZXSTSNETF_PAGED_VIA_IO | The Spectranet was paged in via I/O port. |
ZXSTSNETF_PROGRAMMABLE_TRAP_ACTIVE | The Spectranet's programmable trap is currently active. |
ZXSTSNETF_PROGRAMMABLE_TRAP_MSB | The next write to the Spectranet's programmable trap port will set the MSB of the programmable trap address. |
ZXSTSNETF_ALL_DISABLED | All the Spectranet's traps are currently disabled. |
ZXSTSNETF_RST8_DISABLED | The Spectranet's RST 8 trap is currently disabled. |
ZXSTSNETF_DENY_DOWNSTREAM_A15 | The Spectranet is forcing the A15 line low for any peripherals connecting via its expansion port. |
ZXSTSNETF_NMI_FLIPFLOP | The Spectranet's "suppress NMI" flipflop is set |
chPageA
The page currently paged into the Spectranet's page A (0x1000-0x1fff).
chPageB
The page currently paged into the Spectranet's page B (0x2000-0x2fff).
wTrap
The current value of the Spectranet's programmable trap.
chRegisters
The values of the core W5100 registers.
Remarks
The contents of the W5100's socket registers are not saved - whatever was listening on the other end will have gone away when the snapshot is restored.
ZXSTSPECTRANETFLASHPAGE
This block is used to save and restore the contents of the Spectranet's built-in flash memory.
A zx-state file will contain only one of these blocks. A ZXSTSPECTRANET block will proceed the the blocks.
// Flash memory is compressed using Zlib #define ZXSTSFF_COMPRESSED 1 // Spectranet flash memory page typedef struct _tagZXSTSPECTRANETFLASHPAGEBLOCK { ZXSTBLOCK blk; WORD wFlags; BYTE chData[1]; } ZXSTSPECTRANETFLASHPAGEBLOCK, *LPZXSTSPECTRANETFLASHPAGEBLOCK;
Members
blk
The block header. The block id is ZXSTBID_SPECTRANETFLASHPAGE ('S', 'N', 'E', 'F').
wFlags
Various flags. This can be any combination of:
Flag | Meaning |
ZXSTSFF_COMPRESSED | If set, the flash memory page data (beginning from chData) will be compressed using the Zlib compression library. |
chData
The compressed or uncompressed contents of the Spectranet's flash memory. When uncompressed, this member is exactly 128KB (131,072) bytes in size. When loading Zlib compressed pages, the compressed size can be obtained by:
compressedSize = blk.dwSize - ( sizeof( ZXSTSPECTRANETFLASHPAGEBLOCK ) - sizeof( ZXSTBLOCK ) - 1 );
ZXSTSPECTRANETRAMPAGE
TODO