18×18 icon format: Difference between revisions
No edit summary |
No edit summary |
||
Line 30: | Line 30: | ||
d3: BRIGHT (0 = off) | d3: BRIGHT (0 = off) | ||
Note: The background of the outermost pixels is always transparent. When an icon is selected the attributes of the cells are inverted and the outermost pixels are changed to white from black. |
Revision as of 23:48, 24 November 2011
Proposed format for the 18x18 icons used in the Buddy GUI by Andrew Owen.
Each icon is stored in 56 bytes. This is not very RAM efficient but speeds up drawing by removing the need to shift the data.
The first 54 bytes contain the bitmap in the following format:
Each of the 18 lines is stored in 3 bytes
The 2nd and 3rd byte store the middle 16 pixels of the icon
The 1st byte has the following meaning:
bit 0: first pixel of the line
bit 1-6: always 0
bit 7: last pixel of the line
The last two bytes contain the attributes for the middle 4 cells with the following meaning:
[F E D C] [B A 9 8] [7 6 5 4] [3 2 1 0]
cell 3 cell 2 cell 1 cell 0
For each nibble the following meaning applies:
d0-2: paper colour (000 = transparent)
d3: BRIGHT (0 = off)
Note: The background of the outermost pixels is always transparent. When an icon is selected the attributes of the cells are inverted and the outermost pixels are changed to white from black.